Split Solar Heating Systems

This system uses flat plate, U-pipe or heat pipe collectors, whichare filled with a non-toxic heating fluid, normally distilled water or a mixture of the water and propylene glycol, which lowers the boiling point. The fluid absorbs the heat energy through the collector from the sun and vaporizes to steam, flows through a copper pipe coil in the water tank that acts as a heat exchanger, thereby heating the water. It then condenses back to fluid, which is then pumped back to the collector. The process is repeated until all the water is heated. The system has an intelligent controller that controls the flow of the heating fluid by utilizing temperature sensors in the collector and the water tank

Features and benefits

Suitable for hard water as heating is indirect and tank incorporates a sacrificial magnesium rod and electronic anode
Stylish slim profile design
Collectors can be positioned to capture solar irradiance on the balcony wall, parapet,
Under the window ledge etc. and integrated with the building’s design in order to provide enhanced value
Non-Toxic heat transfer fluidpipework.
All operation parameters are user programmable to suit individual life style

Electric boosted tank can be installed in the balcony or inside the apartment in a closet with minimal pipework.
Controlled variable flow through solar collectors to maximise solar gain
Intelligent controller with advanced features that can incorporate remote monitoring
Can save up to 90% of water heating energy consumption.
Hot water at high pressure regardless of the weather
Low maintenance over service life
Over temperature and pressure protection